Step-by-Step Installation Guide for LiftMaster MyQPCK
This post contains affiliate links, which means we may earn a commission at no extra cost to you
Thinking about upgrading your garage with the LiftMaster MyQPCK? Great choice! Here's a friendly guide to get you through the installation process, making your garage smarter in no time.
Getting Started
Before diving in, make sure you have your MyQPCK components ready, and your current garage door opener is compatible. You'll be working with the Internet Gateway and the myQ Control Panel primarily.
Setting Up the Internet Gateway
First up, let's connect the Internet Gateway (828LM) to your home router. This little device is the bridge between your garage door opener and the wonders of internet connectivity. Just follow the included instructions to connect it to your router and power it up.
Installing the myQ Control Panel
Next, we'll replace your old control panel with the new myQ Control Panel (889LM). It's usually a straightforward swap, but ensure the power is off to your opener before you start disconnecting wires. Once installed, power it on and follow the programming instructions to link it with your opener.
Final Steps & Testing
With both components installed, it's time to test. Use the myQ app to connect to the Internet Gateway and control your garage door. Try opening and closing the door, setting up alerts, and enjoying the convenience of remote access.
