Wayne Dalton Garage Door Remote Compatibility Guide

Is your Wayne Dalton garage door opener remote giving you a headache? Don't worry! In this guide, we'll discuss the selection, programming, and compatibility of Wayne Dalton garage door remotes. Whether you're trying to program your remote or wondering if a different brand's remote will work with your Wayne Dalton opener, we've got you covered.

Wayne Dalton Garage Door Remote Selection

Types of Remotes

There are a variety of Wayne Dalton remote controls available, each with its own unique features. Some of the popular models include the Classic Drive, iDrive, Quantum, and Pro Drive series. Each remote is designed for specific Wayne Dalton garage door opener models, so it's crucial to choose the right one for your system.

Compatibility with Different Wayne Dalton Models

To ensure that your remote is compatible with your Wayne Dalton opener, consult the user manual for your specific model. The manual will provide information on the remotes that are suitable for your opener. If you're unsure or have misplaced your manual, you can always check our Wayne Dalton remote control page for compatibility information.

Programming Your Wayne Dalton Garage Door Opener Remote

Step-by-Step Guide

1. Locate the "Learn" or "Program" button on your garage door opener motor unit.
2. Press and release the button. The LED indicator should light up.
3. Within 30 seconds, press and hold the button on your remote control that you want to program.
4. Release the button when the motor unit's light blinks or you hear a click. Your remote is now programmed.

Remote Resetting and Reprogramming

If you need to reset or reprogram your Wayne Dalton remote, follow the same steps as above. However, if you're resetting the remote, first press and hold the "Learn" or "Program" button on your motor unit for about 6 seconds to erase all previous programming.

Wayne Dalton Opener Models and Remote Control Compatibility

Understanding the compatibility between your Wayne Dalton garage door opener and remote controls is essential. In this section, we'll discuss the compatibility of two specific remotes, the 372 MHz (part number 300643) and the 303 MHz (part number 297134), with different Wayne Dalton opener models.

Wayne Dalton 372 MHz Remote Control (Part Number 300643)

The Wayne Dalton 372 MHz remote control is compatible with the following Wayne Dalton garage door opener models:

• Classic Drive (3012, 3016, 3512)
• Quantum (3212, 3213, 3412)
• Pro Drive (3220C, 3221C, 3222C, 3224C, 3320B, 3322B, 3324B, 3220C-Z, 3221C-Z, 3222C-Z, 3224C-Z, 3320B-Z, 3322B-Z, 3324B-Z)

This remote control features three buttons, allowing you to control up to three garage doors. To check for compatibility with other Wayne Dalton opener models, consult the user manual or check out our selection of Wayne Dalton garage door remotes for compatibility information.

Wayne Dalton 303 MHz Remote Control (Part Number 297134)

The Wayne Dalton 303 MHz remote control is compatible with the following Wayne Dalton garage door opener models:

• Classic Drive (3014, 3018, 3018DLX, 3514, 3522, 3522DLX)
• Quantum (3314, 3316, 3414)

Similar to the 372 MHz remote, the 303 MHz remote control also features three buttons for controlling up to three garage doors. For compatibility with other Wayne Dalton opener models, consult the Wayne Dalton 297134 user manual here.

Always ensure you have the correct remote control for your specific Wayne Dalton opener model. Using an incompatible remote may result in the inability to control your garage door or cause other issues with the opener. Consult your user manuals and manufacturer guidelines to select the appropriate remote control for your garage door opener.

Wayne Dalton Remote Keypad Programming

To program a Wayne Dalton remote keypad, follow these steps:

1. Locate the "Learn" or "Program" button on your garage door opener motor unit.
2. Press and release the button. The LED indicator should light up.
3. Within 30 seconds, enter the desired code on your keypad and press the "Enter" button.
4. The motor unit's light should blink or you should hear a click, confirming that the keypad has been programmed.

Battery Replacement and Installation

Changing the Battery

Over time, the battery in your Wayne Dalton remote may need to be replaced. To change the battery:

1. Locate the battery compartment on the back of the remote.
2. Use a small screwdriver or similar tool to gently open the compartment.
3. Remove the old battery and insert a new one, ensuring the polarity is correct.
4. Close the battery compartment and test the remote to make sure it's working.

Installing the Battery in Wayne Dalton Remote 3973

If you have a Wayne Dalton remote model 3973, follow these steps to install a new battery:

1. Locate the battery compartment on the back of the remote.
2. Use a small screwdriver or similar tool to gently open the compartment.
3. Insert the new battery with the correct polarity.
4. Carefully close the battery compartment, ensuring it clicks into place.
5. Test the remote to make sure it's functioning correctly.

Troubleshooting and FAQs

If you're experiencing issues with your Wayne Dalton remote, consider these troubleshooting tips and frequently asked questions:

1. What kind of battery does a Wayne Dalton remote control use? Most Wayne Dalton remote controls use a 3V lithium coin cell battery (CR2032 or equivalent). Always consult the user manual or the battery compartment for the correct battery type.

2. How do I link a Wayne Dalton motor to a remote? To link your remote to the motor, follow the programming steps outlined earlier in this guide. This will sync your remote with the motor unit.

3. Can I use a Clicker remote with my Wayne Dalton opener? It depends on the specific Clicker remote model and your Wayne Dalton opener. Some Clicker remotes may be compatible with certain Wayne Dalton openers. Consult the user manuals for both devices to verify compatibility.

4. How do I program a Wayne Dalton 303MHz remote? The programming process for a 303MHz remote is similar to the steps outlined earlier in this guide. Press the "Learn" or "Program" button on the motor unit, then press the button on the remote within 30 seconds.

5. What remote works for Wayne Dalton Quantum garage door opener? Wayne Dalton offers specific remotes designed for the Quantum series. Consult your Quantum opener's user manual or contact Wayne Dalton customer support to determine the appropriate remote for your model.

Conclusion

Wayne Dalton garage door opener remotes are reliable and user-friendly. With this guide, you can easily select, program, and troubleshoot your Wayne Dalton remote control. Keep in mind that compatibility is key when choosing a remote, and consult your user manuals.