# How to Install TorqueMaster Flag Brackets (12” & 15” Quick-Install)

**By Jennifer Oden** · 2025-07-16

If you're replacing or upgrading your Wayne Dalton TorqueMaster spring system, installing new flag brackets is a key step in the process. These brackets anchor the vertical and horizontal tracks to the wall and support the spring tube. Whether you're working with a **12-inch** or **15-inch** radius track, the installation is simple with the right parts and tools.

**⚠️ Not sure what radius your track is?**  
[Check out our Track Radius Measuring Guide](https://youtube.com/shorts/LcBUMDHlpik "How to measure track radius")[](#) to find out before you start.

* * *

### 🛠 What You’ll Need:

-   TorqueMaster Flag Brackets (12” or 15” radius)
-   5/16" lag screws
-   3/8” track bolts and nuts
-   Level
-   Drill or ratchet

### 🔧 Step-by-Step Installation:

#### 1\. Choose the Correct Bracket

Before you begin, verify whether your garage door uses a **12"** or **15" radius** track. This will determine which flag bracket you need:

-   [12” Radius Bracket](https://www.expressgaragedoors.com/products/torquemaster-flag-angle-brackets-12-radius-quick-install-track)
-   [15” Radius Bracket](https://www.expressgaragedoors.com/products/torquemaster-flag-angle-brackets-15-radius-quick-install-track)

#### 2\. Position the Bracket

Place the bracket at the junction where the **vertical track** meets the **horizontal curve**. The back of the bracket should sit flush against the wall or jamb board.

#### 3\. Secure to the Jamb

Use lag screws through the slotted holes to fasten the bracket to the wall. Make sure it’s level and solid — this is what holds the track and spring system in place.

#### 4\. Attach the Track to the Bracket

Line up the vertical track’s pre-punched holes with the bracket and insert the 1/4” bolts with nuts. Tighten everything down securely.

* * *

### 🎥 Watch the Install in Action

Prefer a visual guide? Watch our quick step-by-step video below:

[▶️ Watch: How to Install TorqueMaster Flag Brackets](https://youtube.com/shorts/Eh4362wfSBU?feature=share)

* * *

### 💡 Pro Tip: Check for Roller or Track Damage

While you're installing flag brackets, it’s a good time to check your garage door rollers and track for wear. Upgrading to [**nylon rollers**](https://www.expressgaragedoors.com/collections/garage-door-rollers "upgrade your door rollers now") can help your door run smoother and quieter.

* * *

### ✅ Ready to Order?

Get the exact bracket you need for a quick and secure install:

-   [12” Radius Flag Bracket – Shop Now](https://www.expressgaragedoors.com/products/torquemaster-flag-angle-brackets-12-radius-quick-install-track)
-   [15” Radius Flag Bracket – Shop Now](https://www.expressgaragedoors.com/products/torquemaster-flag-angle-brackets-15-radius-quick-install-track)

Need help figuring out which part fits your setup? Contact our team and we’ll help you find the right solution fast.

---

> Source: [Express Garage Doors](https://www.expressgaragedoors.com/blogs/news/how-to-install-torquemaster-flag-brackets-12-15-quick-install)