# How to Replace a Wayne Dalton Anti-Pinch Roller Hinge (9100 & 9600 Models)

**By Jennifer Oden** · 2025-07-16

If your Wayne Dalton 9100 or 9600 garage door has seen better days, it might be time to replace those outer edge roller hinges. These **anti-pinch roller hinges** are essential for keeping your door panels aligned and preventing the rollers from jumping the track—not to mention they help reduce the risk of finger-pinching injuries. In this quick guide, we’ll show you exactly how to replace one in under two minutes.

### What Is an Anti-Pinch Roller Hinge?

This hinge sits on the left and right edges of your foamcore-style Wayne Dalton garage door panels. It holds the roller securely in place while providing a safety upgrade by preventing panel pinch. If your door opens unevenly, feels jerky, or you notice a damaged hinge, it's time to replace it.

### Step-by-Step Installation Guide

-   **Step 1:** Remove the original screws and gently slide the roller out of the track.
-   **Step 2:** Insert the roller into the new hinge, then line up the hinge with your existing screw holes.
-   **Step 3:** Reinstall using your original T-25 Torx screws—or save time with hex head self-tapping screws, available on our site.

**Note:** Hinges are sold individually and don’t include mounting hardware, so be sure you have screws on hand before you start.

### Not Sure Which Hinge Number You Need?

Check out our fast video guide to [identify hinge numbers for Wayne Dalton garage doors](https://youtube.com/shorts/CLAAoh5mCbw "How to Identify Wayne Dalton Hinge Numbers").

### Replacing Center Hinges Instead?

No problem. We’ve got a video for that too. Watch our [Interior Hinge Install Guide](https://www.youtube.com/shorts/91xV3vVKZX4 "Wayne Dalton Interior Hinge Install Guide") for installing anti-pinch center hinges.

### Shop the Part

Grab the exact hinge you need right here: [Shop Wayne Dalton Anti-Pinch Roller Hinge](https://www.expressgaragedoors.com/products/wayne-dalton-anti-pinch-hinge-9100-9600 "Shop Wayne Dalton Anti-Pinch Roller Hinge")

### Watch the Install Video

### FAQs

**Q: Can I install this hinge without removing the garage door panel?**  
A: Yes! You only need to remove the screws and the roller—no need to detach the panel.

**Q: Do I need special tools?**  
A: Just a screwdriver or drill with a T-25 Torx bit. For faster installs, we recommend using a 1/4" driver with hex head screws.

**Q: Are the screws included?**  
A: Screws are not included with the hinge. You can reuse your originals or purchase hex head self-tapping screws separately from our site.

**Q: How do I know which hinge number to order?**  
A: Each hinge is stamped with a number. If you're unsure, watch our [hinge number ID video](https://youtube.com/shorts/CLAAoh5mCbw "Wayne Dalton Hinge Number Identification") for quick help.

---

> Source: [Express Garage Doors](https://www.expressgaragedoors.com/blogs/news/how-to-replace-a-wayne-dalton-anti-pinch-roller-hinge-9100-9600-models)