# Wayne Dalton Foamcore Interior Hinge Install

**By Jennifer Oden** · 2025-07-16

### Wayne Dalton Foamcore Interior Hinge Install: Anti-Pinch Upgrade in Under a Minute

Need a fast, easy garage door upgrade? If you have a Wayne Dalton foamcore garage door, this is one of the smartest safety improvements you can make. This quick tutorial shows you how to install a **Foamcore Anti-Pinch Interior Hinge**—a game-changer for preventing panel pinch injuries and keeping your door running smoothly.

### What Is a Foamcore Interior Hinge?

Designed specifically for Wayne Dalton foamcore doors, this anti-pinch hinge replaces the standard interior hinge to stop the panels from catching or binding as the door opens and closes. It’s a small part with a big safety impact—especially if you’ve got kids or pets around.

### Why You Might Need It

If your current interior hinges are worn, missing, or simply not anti-pinch, your garage door panels could be flexing dangerously. Replacing them with these upgraded hinges helps reduce long-term stress on your door, prevents pinch points, and improves smooth operation.

### How to Install a Foamcore Anti-Pinch Interior Hinge

Installation takes less than a minute:

-   **Step 1:** Remove your old hinge. Save the original screws—typically T-25 Torx.
-   **Step 2:** Line up the new hinge with the same holes on the inside of the door panel.
-   **Step 3:** Tighten the screws flush. You can reuse your Torx screws or upgrade to hex head self-tapping screws (available on our site) for a speedier install.

### Upgrade Tip

If you're replacing **roller hinges** on the edge of your foamcore panel instead, check out our [Roller Hinge Install Guide](https://youtube.com/shorts/LtmAk-c5R4I "Roller Hinge Install Guide").

### Not Sure Which Hinge You Need?

Watch our quick video to [identify the correct hinge number](https://youtube.com/shorts/CLAAoh5mCbw "Identify Garage Door Hinge Number") for your Wayne Dalton door. It only takes 30 seconds!

### Shop the Part

Ready to upgrade? Click below to grab your hinge:

[Shop the Foamcore Anti-Pinch Interior Hinge](https://www.expressgaragedoors.com/products/foamcore-interior-hinge-anti-pinch "Shop Foamcore Interior Anti-Pinch Hinge")

### FAQs

**Q: Do I need any special tools for this install?**  
A: Just a basic drill or screwdriver with a T-25 Torx bit. For a faster install, you can use hex head screws which fit a 1/4" driver.

**Q: Can I use this hinge on non-foamcore Wayne Dalton doors?**  
A: This hinge is designed specifically for foamcore-style Wayne Dalton models. If you have a steel-back or different panel design, reach out and we can help you find the right fit.

**Q: How many hinges should I replace?**  
A: We recommend replacing all interior hinges on the foamcore panels to get full anti-pinch protection and consistent door movement.

**Q: Is this something I can DIY?**  
A: Absolutely. This is a beginner-level garage door repair—fast, easy, and affordable.

---

> Source: [Express Garage Doors](https://www.expressgaragedoors.com/blogs/news/wayne-dalton-foamcore-interior-hinge-install)